PC's Blog

I moved from Wordpress

2007-09-11T09:25:00.000+05:30

I moved from here to Wordpress last year. Now I have moved to my own website (still using Wordpress as the blogging engine).

Dont forget to update your bookmarks.

I am moving to wordpress

2007-01-18T06:23:00.000+05:30

If you need me, I will be on wordpress.

IIT

2006-09-08T18:57:00.000+05:30

You will find this funny if you havent studied in the IIT.

Bridges of Madison County

2006-07-31T07:31:00.000+05:30

I haven't read a book in one sitting for a long long time. I like to take my time while reading books pausing every few pages and thinking over what I read till then. This is the same whether the book is fiction or non-fiction, but the pausing time is usually greater for non-fiction books, understandbly. Today I went to Minneapolis Central Library and while browsing the shelves I saw the book, "Bridges of Madison County". I had seen the movie earlier and had liked it very much, especially towards the ending scenes. I am a huge fan of Clint Eastwood and I like all his movies, so me liking this movie was no surprise. I had heard that this movie was a special case where the movie out-did the book, which usually doesnt happen.
I took the book from the shelf and read the first few pages and I got interested. I just sat down on the floor and continued reading it. Soon I reached 50 pages and I thought I should read the book fully and so I found a comfortable chair and read the whole book in one sitting. Many a times my eyes filled with tears (it is not surprising anyway, I am a typical cancerian - emotional and sensitive).
I finished the book just before the library closed and sat there for atleast 10 minutes pondering over the greatest love story I ever read. Contrary to popular opinion I think that, in this case also, the movie didnt reach to upto the beauty of the book. I really cant figure out what made me read a book whose story I knew fully (as I had seen the movie), yet move me so deeply. Whatever the reason I am glad that I read the book. Try it, I am sure you would too...

P.S. I wrote this as a reader review for amazon.com, then thought of publishing it as a blog entry too. I think I am running out of topics to blog about, lol.

Quality service from Nerdbooks again

2006-07-31T07:09:00.000+05:30

As you might be aware from my previous post, I am all praise for NerdBooks
I ordered 3 more books from them and got them in 3 days on DHL ground shipping, with tracking numbers and all. I ordered the books on a monday morning and the books were shipped that morning itself. Arent these guys amazing !

BTW, the books I ordered are :

P.S. I dont own nerdbooks nor do I own any of their stocks :-))

Nerdbooks

2006-06-24T21:53:00.000+05:30

I bought some books from Nerdbooks and found the experience a good one. I put the order online by 12.30 or 1 pm and got a call from them by 3 to confirm the order and the books were shipped within a few hours. The books reached me by the second day along with a free T-Shirt. The packing was excellent and the books was in top condition. They usually give a discount 10% to 15% better than Amazon.
If you are planning to buy books online, I strongly recommend Nerdbooks.

Myths and Truths

2006-05-22T11:36:00.000+05:30

Something very interesting here.

David Blaine - The Enigma

2006-05-21T05:51:00.000+05:30

The ultimate street magician David Blaine.

Thanks to Metacafe for the video.

Buy No Buy

2006-05-15T03:30:00.000+05:30

I am a huge fan of Jeffrey Richter. His latest book CLR Via C# is getting rave reviews everywhere. I decided to buy this book online through buy.com but my choice of seller turned out to be very bad - a long wait till the book was shipped, a long wait till I find that the shipment is lost, another long wait to get the refund. I just dont understand why people cant just run their business satisfactorily (notice I didnt even say "run it well"), especially in these days of cut-throat competition.
I ordered Framework Design Guidelines: Conventions, Idioms, and Patterns for Reusable .NET Libraries by Brad Abrams, Krzysztof Cwalina from informit, which they shipped on the next day and was delivered on the 4th day and the shipping was FREE.
So if you are going to buy.com to save a few dollars compared to amazon or other reputed sellers, I would recommend you shell out the extra few bucks for a better shopping experience.

Un-Tag Me !

2006-05-14T10:26:00.000+05:30

My tagboard being a "huge success" I decided to remove it from the blog. Now my cute photo comes on the top of the right panel, positively increasing the traffic of girls to my blog.
Regular visitors might have also noticed that I have added a Google link panel to the top. It consists of 3 sections : Searches, Webpages and News. These are NOT ads, but they show links to related searches, webpages and news respectively. Check it out.

Bangalore - A Flash Back

2006-03-31T10:25:00.000+05:30

On March 15th 2006, I bid goodbye to Tavant after a period of almost 2 years. There were happy moments and sad moments; and times when I was proud and never wanted to leave Tavant and there were times when I wanted to flee at the earliest chance. But as the wheels of time roll by we all have to move on. And I am moving on.

Binil had introduced me to Tavant and its excellent work culture long before I joined Tavant. When Binil comes to Mavelikara for vacation we used to have long chats on topics ranging from cricket, politics and other bullshit to programming and the internet. He could talk endlessly on any topic beneath the sun, and he sure has his own opinion about everything. He vast knowledge on certain topics are pretty impressive and his logical & analytical way of thinking has influenced my thought process significantly. When Tavant had a vacancy in Microsoft Technologies open, I sent him my resume. He gave me an idea on the type of questions they asked at Tavant and what kind of people they are looking out for. I was very low on confidence but he gave me a lot of encouragement. He had taken a lot of pain to get me hired in Tavant, and I owe a lot to him for his brotherly affection and continious encouragement which helped me good when the going was tough. He is one helluva friend to have - I owe him a lot.

When I first came to Bangalore I lived with Binil and his friends in Wilson Garden. The original members of that house were Girish, Sanju, Ajith & Binil and the guest members were Vineeth, Hari, Jibu, Vijith and Me. Girish & Sanju were working at Sun, while Ajith, Binil, Vineeth & Me were at Tavant. Hari & Jibu were hunting for jobs and Vijith, who was Vineeth's roommate & colleague at Oracle, Hyderabad was working temporarily at Oracle, Bangalore. On the days where there was cricket match on TV, there would be more guests (Syam, Tinu etc) and the fun would be even more. There would be usually two groups - Sachin supporters & Ganguly supporters. A war of words follows which usually ends by both groups declaring themselves victorious, even when Sachin and Ganguly were out for duck :-D. We used to go to Purple Haze at times and we will get drunk to our nose and sing songs on the way back. One night on the way back we got down from the rickshaw half way to our house and walked the rest singing songs, howling and making all sorts of noises. It was pure bliss, the life in Wilson Garden.

I joined Tavant on 20th May 2004, which was a kinda landmark day in my life. I just became the highest paid guy in my class, aaah.. :-). I was put into the Roper Team which develops softwares for companies under the Roper Scientific Group. The dev team consisted of Manas, Rajesh and me. Ganesh Suryanarayana was the Tech Lead and Gautam Kumar the Project Manager. Manas is one of the nicest guys I have ever met and very trustworthy. Rajesh is always very helpful and known for his extreme frugal nature ;-). It was a closed knit team and we had a pretty easy going schedule. It was during my early days that we had a party called "Tavant Rocks !", which included the Quarterly Excellence Awards and some cultural activities. There was plenty of beer and I got a real kick after which there was plenty of dancing and fun allround. I dropped a plate with food on the floor which gave me a neat drunkard image. I remember Ganesh telling me the next day that I shouldnt be drinking to a point where I lose my consciousness. LOL. There were several parties in Tavant after that but the first one was the best, IMO. Probably just my biased view.

In the meantime Vineeth and me moved to a house in BTM and Vijith joined us when he moved to Bangalore permanently after joining Infosys. Soon the members at Wilson Garden dispersed and Binil joined us. Sanju & Girish took a house in Santhinagar near their office along with Hari. Jibu got married and went to Dubai. Ajith had moved with some of his friends just after he came back from onsite. I lived there till Vineeth got married and then moved to Madiwala with my college-day-friends. Binil took another house on his own.

A guy called Sailesh joined Roper for a brief period and just before he left, Biju joined us. Biju is a real hardworker and is fun to be with. Sony also joined our team as soon as we started on the Saguaro project. Sony is a free spirited guy and is very helpful when we need him the most. He is a good friend to have. Jorge Ochoa-Lions and Austin Blanco were our points of contact on the Saguaro project, which we were developing for Photometrics, a Roper company. Jorge (pronounced hor-hey, but in India he accepts it when somebody calls him George, LOL) is the most charming man I have ever met. He is a very understanding guy and always pleasant and we feel immediately at home with him. Austin is a bundle of energy and he seems to enjoy every second of his life, irrespective of the circumstances. Both of them took great pains to make us understand their requirements and they helped to get a much better grip on image processing domain. It was a great pleasure working with them and I am going to miss the tele-conference calls with them. Roper is a better team, thanks to Jorge and Austin.

We had a team outing to Kemmanagundi along with the LBAC team. Roper had only a few members and Gautam was managing both the projects so it made sense to club both teams for the outing. Unfortunately Manas couldnt come for the outing because he had to go to his native at that time. The trip was a memorable one. We came to interact with and made friends with many of the LBAC guys (and gals). Sure enough it was a great experience and lots of fun - rope climbing, trekking, playing games etc etc. I wish we had this year's team outing before I left.

In April 2005 Manas, Rajesh & me attended a training at MediaCybernetics (another Roper company) located at Silverspring, Maryland. It was my first trip to US of A. The training was good and we got an opportunity to meet the legendary John, Pierre & Trey, the guys who developed the IQL Image Processing Library which we were using in our project. We couldnt meet Craig since he was working from his home (in Seattle if I remember correctly). Guys from other Roper companies were also attending the training including Jacob Wilbrink of Gatan, who was our point of contact for a project we had developed earlier. Apart from attending the training, we also visted the White House (which was open to public on the day we visited it), Lincoln Memorial, World War II Memorial (and several other war memorials too - America has fought a lot of wars) and many museums. We also visted the Arlington Cemetery where we witnessed the Change of Gaurds at the Tomb of the Unknown Soldier. America is a beautiful place.

At Tavant I made some great friends including Sajeesh Sankaran, Vinod Varghese, Suresh Nambrath, Eldho Syriac, Ajith Prabhakar, Jenish Joy, Vijay G, Nisha Glory, Nandakumar Devi, Vikas Sasidharan, Subin P, Anish Joyson, Justin Joseph the list goes on... Some of these guys have left Tavant before I did, but I do keep in touch with most of them. I treasure the friendships I found in my days at Tavant.

I had purchased the domain name www.pradeepc.net and hosted it with deltawebhosting. On the same server I started a forum called WeaselZone [http://www.weaselzone.com] which was intended as a hangout for IT people. But unfortunately it did not flourish. One of the reasons was that in my immediate circle there were only a few people who were members of Forums and knew its value. So the members I managed to pull in in the early stage were not able to contribute much for the growth of WeaselZone. Actually many of my friends didnt even join due to their lack of knowledge of the concept of an internet forum. Another reason was that some people who were interested in such activities didnt have internet access from their office which severely limited their contribution. After this failure, I ventured into the mailing list arena. The idea was to forum a group of keralites working in the IT field. The mailing list was called e-keralites and was created as a google groups [http://groups.google.com/group/e-keralites]. It was my team mate Rajesh who suggested the name for the groups. I managed to pull in around 50 members initially from my friends circle. I started a referral scheme where the member who referred the most number of friends would receive a free t-shirt. This helped to pull in some members and soon we were really on our way. The number of mails started to increase, which posed some problems. Some people were sending forwards which was vehemently opposed by others. I used to send periodic mails suggesting that we limit the number of forwards sent to the groups. This didnt do much good and as a result some members quit from the groups. We were moving into a state of chaos. We had a month when we had above 300 mails in a month, an average of 10 mails per day ! I was forced to ban all forwards to the groups which hurt some sentiments, but now I think it was a good decision. We have a website http://www.e-keralites.com where members would be able to see the details of all members of the groups. Anish Joyson won the t-shirt for the highest number of referrals (about 25 people). Now the list is more matured with more than 260 members and the future looks promising.

Outside Tavant my life was with my old college mates - Ajith, Deepak, Jacob, Aby, Moncy & Tonio. Deepak has recently moved to Chennai. The main activities in our house are little fights, pulling each other's legs, being nostalgic about our college days and drinking beer and the associated demos. On weekends we sometimes indulge ourselves by a movie at the PVR followed by dinner at Transit or KFC. Our house owner, Mr.Thomas John, and his wife, who lives upstairs are very kind and caring folks. Devi amma, our cook, has 10 tongues and we all wake up listening to her rants about anything and everything. Sometimes she can be very irritating, but her motherly affection towards us shines through. She calls Moncy as Jinju, Aby as Avi (or Idi) and Tonio as Ravi. Jacob provides a lot of entertainment by lying outrageously to Devi amma about us. For eg, he once told her that Aby is married, his wife is in Gulf and they are living separately to make as much money as possible. Devi amma believes it all when Jacob tells her these lies. We pulled a similar trick on him by telling Devi amma that he was caught by Police for indecent behaviour with girls. It was great living with you guys, I will miss you all a lot.

Looking back, it was like a view through a kaledeioscope - moments of joy and exhilaration, moments of melancholy and tears, friends and soulmates, the traffic jams, evenings at The Forum, movies at PVR, fish burger from Transit, books at Gangaram's and eating a lot of dust - my life in Bangalore. Some things to forget and a lot unforgettable.

P.S. What I wrote above probably varies in some respect to what actually happened, because what we see are exactly that - just what we saw, a 3-D version of what really happened.

Tag Me !

2006-03-14T12:36:00.000+05:30

I have created a tag board for my site. Well, it will be more correct if I say I added a tag board, because I didnt create it myself, but I am using a free service by cbox. It is very easy to set it up and it looks pretty cool too. The basic service is free, but if you want premium service you can pay them a nominal sum of $2 to get a tagboard which is ad-free, has archiving capability, online counter, banning etc etc.
Let me see if anyone is putting up any comments in my tagboard :-)

Yet Another Blog

2006-03-01T11:18:00.000+05:30

I have created yet another blog here.

New Blog

2006-01-03T13:10:00.000+05:30

I plan to shift my blog to my own website:
http://www.pradeepc.net/blog
So if you find no updates here, you know where to look ;-)

Blog using MS Word Part 2

2005-11-16T14:03:00.000+05:30

That worked fine. Cool!
See details here:
http://help.blogger.com/bin/answer.py?answer=1180

Blog using MS Word

2005-11-16T14:00:00.000+05:30

Blogger has a cool feature now to write your blogs in MS Word and directly publish it. I am just testing this feature.

Unit Testing - A Dialogue

2005-11-02T17:33:00.000+05:30

"Unit Testing ?"

"Yes, dear Watson. Unit Testing."

"Never heard of it."

"That is not too surprising for me considering the amount of time you spend debugging and fixing the code once the QA people warm up."

"Is it some kind of magic wand which makes all those bugs disappear?"

"No...not really. Considering your commendable interest in magic and stuff, I would put it this way - its more of a Guardian Angel who shines upon you while you code."

"Really? Thats cool. Where and how can I obtain the services of one of these Guardian Angels?"

"You cannot buy one. You should create your own, through what I call a paradigm shift."

"What is this thingy which you call a paradigm shift?"

"It is called Test Driven Development."

"All these new terminologies are breaking havoc on my poor brain. First of all, please enlighten me on what a Unit Test is."

"A Unit Test is a piece of code - usually written by the developer himself during the development process itself - for testing a small and specific functionality of his application code."

"But why would anyone in his senses do that kind of a thing?"

"You could know that your code does what you intend it should do, everytime."

"Could you give me more context on this ?"

"Sure, building on a solid foundation is the only way to build anything that will stand the test of time whether it be constructing a building with 100 floors or developing an application. That is not to say that what is built on top of the foundation is not important but if you are building on top of something you had better make sure what lies beneath is trustworthy. While developing an application we usually write some methods which will be used in other methods which in turn will be used in yet other methods and so on. If your first method has some bug then all your other methods are implicitly buggy as well, even though they might not introduce any bugs on their own. You are building on a weak foundation."

"But wont I find those bugs when my application is tested after the coding is complete?"

"Yes, probably you would, but consider the situation in which your method works correctly for some parameters but not for others. The bug might get detected during the testing phase or after production roll-out depending on how lucky (or unlucky, if you so prefer) you are. And you surely know its least expensive, in terms of effort and money, to fix a bug at the earliest time possible."

"That is great, now tell me please, what is this test driven development ?"

"Now that you know what unit testing is, you almost know what test driven development is. Test driven development goes like this - You write a test first. Run it. It should fail since you havent written any functionality yet. Now add the mininum code so that the test passes. Refactor. Repeat this cycle till your method has all the required functionality and all the tests pass."

"Are you meaning to tell me that I should write my test even before writing any code for the functionality."

"You couldnt be more close to the truth, dear Watson. Whenever you add a new functionality, the first step should be to write a Unit Test that anticipates and uses the new code. After you run this test which would fail, add new code and re-test to verify it. Apart from verifying that your new code works, Unit Tests force you to think in advance about the best way to write your code. By regularly following this idiom you can write solid, well-designed code."

"Sounds like this Unit Testing idea is a good one."

"Yes it is. But like everything good, it comes for a price."

"How is that ?"

"You have to put in some effort to create the Unit Tests. The effort also includes thinking of how you want your code to work and how to test whether it does the same as well writing the actual testing code. As a one time investment you need to learn to the Test Driven Development paradigm, which is not very hard as you will soon see. Once you get the hang of it you would never want to go back to your style of programming."

"But wont it take too much time to write the tests?"

"If you dont write unit tests, you would probably spend more time debugging and fixing your code. If you write unit tests, you would immediately know it if any change you make to your code broke something else. This could save you much time which you would be spending trying to find out what broke your code which was working all the me. Additionally, the unit tests acts as 'executable documentation' for your application code."

"But shouldnt the QA people be doing the testing anyway?"

"Yes, they should be doing it. But unit tests would be testing the code at the lowest level and actually complements the functional testing. If you have written good unit tests, there will be much less to fix in the functional testing phase."

"I guess I am convinced of having my own Guardian Angel. How do I start ?"

"You can start by making use of an infrastructure which will help you create and run Unit Tests for your code. Such frameworks are readily available today."

"I'll bet these frameworks are pretty expensive. My boss would never approve."

"If you start betting like this, I am sure you are going to lose a lot of bets. You can get Unit Testing frameworks for free."

"Free...?!!!"

"... as in freedom as well as free beer. I would recommend you look at NUnit. You can download a copy of the NUnit unit testing framework from NUnit.org"

Modules in Visual Basic .NET

2005-10-18T16:17:00.000+05:30

If you are a Visual Basic 6 programmer getting your feet wet with Visual Basic .NET, you would certainly go through an unavoidable phase which involves a mixture of happiness and sadness - the pain of finding some feature of VB6 not being supported in VB.NET and the happiness of finding that some of your other favourite features are still there. If you loved writing your functions in modules when you used to program in VB6, you can rest assured that the VB.NET team has gone some length to keep you happy.

In case you never programmed in VB6, you would be wondering what a module is. Its a convenience offered by VB6 to write functions (you can have variables in a module too). You can access the functions (or variables) in a module just like calling global functions (or variables) i.e. by omitting the module name as prefix.

Please note that the CLR has no notion of a module. Then how come we still have modules in VB.NET? In a moment we will see how the VB.NET team manages to keep the CLR as well as the VB6 programmer happy.

Let us create a module as follows :

Public Module TestModule
Public Sub TestFunction()
Console.WriteLine("Test function of TestModule called !")
End Sub
End Module

You can call the TestFunction from outside the module in two ways:
- TestModule.TestFunction()
- TestFunction

The first method would give us some clue as to what happens to a module when it is compiled. Yes, you are right, it will be compiled into a class and all of its members will be Shared (static). But wait, if that is the case then how is it possible to make the function call in the second way? The VB.NET team has more tricks in their bag it seems. To make it possible to call the TestFunction as if it were a global function, an attribute is applied to it - Microsoft.VisualBasic.CompilerServices.StandardModuleAttribute. For the casual programmers this completes the illusion - the VB6 module is still there in VB.NET. The rest of us who does not believe in magic, would look under the hood and find the truth. For this purpose you will need to find a good friend in ILDASM (or a similar tool, if you so prefer).

Here is the declaration of our TestModule in IL :

.class public auto ansi sealed TestModule
extends [mscorlib]System.Object
{
}

From this declaration that we find that our module has been compiled to a class TestModule which is sealed (means NotInheritable). Thus you cannot use a module as a base class. Although not obvious from this declaration, we should be aware of two things :
- all members are implicitly Shared (this can be verified by looking at the IL for the function). You cannot explicitly declare a member as Shared, it will result in a compilation error.
- you cannot create an instance of this class.

But if you think about it again, the class is NotInheritable (sealed) and you cant create an instance of it either, which means that the class should be MustInherit (abstract). A class cannot be NotInheritable and MustInherit at the same time, but then how do we explain this apparent paradox ? The compiler pulls a trick here. The class isnt made abstract, instead the compiler just "forgets" to add a default constructor. We know that if we dont define any constructor for a class, the compiler will automatically add one for you (the default constructor). In the case of Modules, VB.NET wont allow you to write a constructor manually. Neither will it add a constructor automatically for you when it compiles the module. It is the absence of the constructor that prevents the creation of an instance of a Module.

If you are a C# programmer, you would have but one doubt - how can you use a VB.NET Module from C#?
If you expose a Module from a VB.NET library and use it in a C# project, we wouldnt have any problem if we just call the functions like we are calling static functions declared in a class. We are forced to use the Type prefix (the name of the Module) unlike in VB.NET where we could simply invoke the function by omitting the module name. We cant create an instance of the the Module, just like in VB.NET.

If you think that all is well with Modules, then you havent heard the full story. If we have 2 modules in your project and both contain functions with same name and signature, then we are forced to prefix the Module name to resolve the ambiguity. This issue is caught by the compiler and is not much of a problem. But you we could get in trouble if there are two functions of same name and signature in two modules which reside in different assemblies. The compiler would look in the modules of the current assembly for a match before it would look in external assemblies. This makes perfect sense but can catch us off gaurd if we arent aware of the possiblity, especially if multiple developers work on the same module. It would be better to prefix the Module name to prevent such problems - we might end up calling a function in a Module in the local assembly when we really wanted to call a function residing in a Module in an outside assembly.

Event driven programming with Visual Basic .NET

2005-10-11T18:51:00.000+05:30

If you are a C# developer with no knowledge of Visual Basic.NET, probably you would like to read this instead.

If you have programmed in C# and VB.NET you would have noticed that the languages are very similar and there exists a line-to-line correlation with the same program written in these languages. In fact many people say that C# is just VB.NET with curly brackets (or vice-versa if you prefer). Many tools exist that provide translation from VB.NET to C# and viceversa at a good accuracy. But when I wrote my eventhandling tutorial in C#, I decided that a VB.NET version is also needed because there is some difference between the two, albeit on a superficial layer.

EventHandling mechanism in VB.NET provides better flexibility than that of C#. Although the underlying paradigm remains same, the VB.NET compiler provides some shortcuts which can be a real convenience (it actually depends on the developer's mindset whether it is actually a convenience or not).
There are 2 ways by which a Publisher can publish an event and 2 ways to handle it. The first method is to declare a delegate and an event seperately.

Namespace VBEvents
Public Class Publisher

Public Delegate Sub StateChangedEventhandler(ByVal sender As Object, ByVal args As EventArgs)
Public Event StateChanged As StateChangedEventhandler

Public Sub CauseStateChange()
Console.WriteLine("Publisher going to raise event")
RaiseEvent StateChanged(Me, EventArgs.Empty)
End Sub
End Class
End Namespace

Here we can see that there is a Delegate that defines the eventhandler's signature and a Event of the same type as the delegate. To raise an event we use the RaiseEvent keyword. Everything straightforward so far. Now lets see the second method.

Namespace VBEvents
Public Class AnotherPublisher
Public Event StateChanged(ByVal sender As Object, ByVal args As EventArgs)

Public Sub CauseStateChange()
Console.WriteLine("AnotherPublisher going to raise event")
RaiseEvent StateChanged(Me, EventArgs.Empty)
End Sub
End Class
End Namespace

Here we combined the the delegate and event declaration into one as

Public Event StateChanged(ByVal sender As Object, ByVal args As EventArgs)

Note that this is a convenience provided by the VB.NET compiler and that the IL produced as similar in either cases. The compiler automatically creates a delegate for you and names it by appending "EventHandler" to the Event's name. Thus the final outcome is one and the same. This method is not available in C#.

Now lets look at the subscription process. The first method is to subscribe is shown here :

Namespace VBEvents
Public Class Subscriber

Private m_Pub As Publisher

Public Sub New(ByVal pub As Publisher)
m_Pub = pub
'subscribe
AddHandler pub.StateChanged, AddressOf pubEventHandler
End Sub

Private Sub pubEventHandler(ByVal sender As Object, ByVal args As EventArgs)
Console.WriteLine("Handled event raised by " & sender.GetType().ToString())
End Sub

Public Sub RemovePubHandling()
'unsubscribe
RemoveHandler m_Pub.StateChanged, AddressOf pubEventHandler
End Sub
End Class
End Namespace

Here we use AddHandler to subscribe to an event and RemoveHandler to unsubscribe.

The second method uses the WithEvents keyword on a reference to the publisher to tell the compiler that we are interested in handling the events that this publisher would raise. To specify which method acts as the eventhandler for which event, we use the "handles" keyword.

Namespace VBEvents
Public Class AnotherSubscriber
Private WithEvents m_anotherPub As AnotherPublisher

Public Sub New(ByVal anotherpub As AnotherPublisher)
m_anotherPub = anotherpub
End Sub

'eventhandler for StateChanged event
Private Sub pubEventHandler(ByVal sender As Object, ByVal args As EventArgs) Handles m_anotherPub.StateChanged
Console.WriteLine("Handled event raised by " & sender.GetType().ToString())
End Sub

Public Sub RemoveAnotherPubHandling()
RemoveHandler m_anotherPub.StateChanged, AddressOf pubEventHandler
End Sub
End Class
End Namespace

The difference between these two methods is that in the second method the subscription is done statically (i.e.its hardcoded that a procedure will act as the eventhandler for a particular event while in the first method we can dynamically choose the eventhandler. The unsubscription process is same for either methods. Note that you can assign different instances of the publisher class to the withevents variable thereby handling events raised by different objects. But the downside is that there is a performance problem associated with assignment to a withevents variable. For more details on this, see Jeff Richter's most excellent book - Applied Microsoft.NET Programming with VisualBasic.NET.

If you were really paying attention you should be wondering how the "Withevents" does its trick. If we make assignment to a WithEvents variable, how will the compiler subscriber to that instance and unsubscribe from the previous instance that the variable referred to? To see whats really happening load up ILDASM (which should be your best friend if you want to see whats happening under the hood) and you can see that the compiler adds two methods to access the withevents variable. If your withevents variable is named m_Pub, the methods will be named get_m_Pub and set_m_Pub. When you make an assignment to a withevents variable, the compiler will check whether the variable currently refers some instance or not. If it refers to some instance, we unsubscribe from that instance and then subscribe to the new instance (this is what creates the performance problem which I referred to in the last paragraph).

C# makes use of the overloaded += and -= operators for subscription while VB.NET uses AddHandler and RemoveHandler for the same purpose. If you use ILDASM, we can see that the compiler creates two procedures in the publisher class behind your back for the subscription and unsubscription processes. If you event is named myEvent, the procedures will be called add_myEvent and remove_myEvent.

P.S. I know the code formatting sucks, but it would be a hell of a job to manually format it, but maybe I would do it some other time

The Tipping Point

2005-10-10T11:30:00.000+05:30

I wrote this some months ago, but forgot to publish it at that time.

It has been quite some time since a read a book from start to finish. In fact it has been years. Last week, Abhishek and Prasanth had come to Bangalore and I went to The Forum with them. In LandMark I saw a low priced edition of The Tipping Point. I have been seeing Blink : The Power of Thinking without Thinking on the top sellers list for quite some time and I knew that The Tipping Point was written by the same author (Malcolm Gladwell). So I thought I would give the book a try. I was planning to go home on 31st, so anyway I would be getting some time to read.

I started reading the book on that evening itself. After reading through the first few pages, i was not quite impressed. But soon the book started picking momentum. The book has something special about it, there is no cute jugglery with words, it is written in a very straightforward manner without the slightest attempt to make himself sound smart.

The core of the book is an explanation of how epidemics get started. An epidemic is not be taken only in the medical sense, it also refers to how all of a sudden certain behavioural patterns emerge which produce a sweeping change. The previous sentence actually doesnt do justice to the contents. It is almost like a thriller story, the author first mentions about an epidemic and analyzes the causes that we associate with the epidemic. Then the twist comes - slowly we are put into an entirely different perspective which sometimes leaves us spell-bound, the facts sometimes so strange that we cant even believe it.

This book presents a very interesting read. As I mentioned earlier, I read this book from cover-to-cover in 2-3 days, something which I havent done in years. I would give it 4.5 stars out of 5.

Amazon Review

2005-10-08T17:15:00.000+05:30

I spend a lot of time reading the reviews of books at Amazon. That gives a better idea of what books to buy if I'm interested in learning about a particular topic. I wouldnt say that all reviews are correct or would be made with an impartial mindset, but in general you would get an overall impression of the book. Several times I was tempted to write a review myself, but I always kept postponing it. This week I did it. I wrote my first review for C.J.Date's Database In Depth. You can see the review here. The book is simply great. I would highly recommend it to all of those who are working with databases or would like to have a good knowledge of Relational Theory.

Interested in me ? Subscribe please !

2005-10-07T12:31:00.000+05:30

The contents of this blog may not interest you as did its title, because its a technical one. I have decided to include more technical articles (inspite of the fact that there are gazillion tech blogs out there) not because I think this one is going to be better than them but just because it would help me understand things in a better way. So my technical rants are just for my own benefit. If anyone else gets something useful out of these blogs, that would be a real pleasant bonus.

I was also confused as to how my approach should be. Should I write it in such a way that non-techies would also understand it ? Or should I aim at the developers who have atleast a general idea of what a class is? Although I would like to go the first way, there are atleast three reasons I am forced to go with the second option.
1)I dont think non-techies would like to dig deep into the .NET trenches irrespective of the way I present things.
2)Most of the people who read my blog are technical people.
3)I wouldnt be able to do justice to the real topic at hand, if I have to write so much explaining the context to the layman which is so painfully obvious to techies.

The title of this blog might have given a clue to what this blog is going to be. Its about programming with events. I just would like to assume that you would be knowing what an event is. If you dont, there aint much use reading the rest of this anyway.

Events are a convenience for modern programming. I will show here how to implement event handling mechanism in C#. Delegates are an integral part of the .NET framework and play a key role in the event handling mechanism. Put simply, delegates are type-safe function pointers.

Let us assume there is a Publisher class which raise an event and a Subscriber class is interested in that event.

using System;

class Publisher
{
private int _state = 0;

public delegate void StateChangeEventHandler(Object sender,EventArgs args);
public event StateChangeEventHandler StateChanged;

public int State
{
get
{
return _state;
}
set
{
_state = value;
if(StateChanged != null)
StateChanged(this,EventArgs.Empty);
}
}
}

The above code can be explained as follows. The publisher class contains 2 key members which allows it to raise events. One is a delegate and the other is the event. The delegate specifies the signature for the event handler methods. Two conventions are usually followed here. First one is regarding the delegate name - it should end with EventHandler. The convention for the event handler signature is to have 2 parameters and the return type as void. The first parameter will be the object that raises the event (the source of the event or in other words, an instance of the publisher). The second parameter will be an instance of a System.EventArgs class or a class that derives from it. There is a well defined logic in this convention. The obvious advantage is the resulting consistency among event handlers. Also, the choice of the first parameter as the event source allows a single event handler to handle events from multiple sources. The event handler can examine the parameter to determine which object raised the event. The requirement for this to work is that the signature specified by the 2 delegates should be same.

In our Publisher class we have an event called StateChanged which will be raised when the State property changes. To raise the event we use this code :

StateChanged(this,new EventArgs());

But the problem is that if no objects have subscribed to this event, you will get a NullReferenceException. To prevent that we need a check :

if(StateChanged != null)
//raise event

Usually we would keep the above code in a separate method like:

private void OnStateChanged(EventArgs e)
{
if(StateChanged != null)
StateChanged(this,e);
}

For additional flexibility we can make this method protected virtual so that derived types can have some control over the firing of events.

protected virtual void OnStateChanged(EventArgs e)
{
if(StateChanged != null)
StateChanged(this,e);
}

Now our Publisher class will look like this :

using System;

class Publisher
{
private int _state = 0;

public delegate void StateChangeEventHandler(Object sender,EventArgs args);
public event StateChangeEventHandler StateChanged;

public int State
{
get
{
return _state;
}
set
{
_state = value;
OnStateChanged(EventArgs.Empty);
}
}

protected virtual void OnStateChanged(EventArgs e)
{
if(StateChanged != null)
StateChanged(this,e);
}
}//~end of Publisher class

Now that we know how to publish and raise events, we can look at how to setup a subscriber.

class Subscriber
{

public void Subscribe(Publisher pub)
{
pub.StateChanged += new Publisher.StateChangeEventHandler(pub_StateChanged);
}

public void UnSubscribe(Publisher pub)
{
pub.StateChanged -= new Publisher.StateChangeEventHandler(pub_StateChanged);
}

private void pub_StateChanged(Object sender,EventArgs args)
{
Console.WriteLine(sender.GetType().ToString() + "'s State Changed !");
}
}//~end of Subscriber class

The code is mostly self explanatory. The Subscribe and UnSubscribe methods show how we can subscribe to and unscribe from events using the += and -= overloaded operators. For the eventhandler the name of the method can be anything (the convention is 'object_event') but the signature of the event handler should conform to the signature specified by the delegate.

We can have static events if we so prefer. If you subscribe to a static event, you will receive notifications from all instances of the Publisher class and if you unsubscribe you will recieve notifications from none. You dont need an instance of the Publisher class to subscribe to a static event. Note that nothing prevents the eventhandler function itself from being a static function.

As a point of interest, it should be mentioned that an event is implemented by a multicast delegate. To handle multiple subscribers it would internally maintain a list of subscribers.

If you didnt guess it till now, the event mechanism follows the Observer design pattern (see Design Patterns by the GoF).

P.S. Sorry about the formatting, I tried my best though :-)

Shocking News !

2005-10-04T14:49:00.000+05:30

The most shocking incident I have heard in recent times. I got this mail from a friend. Read On....

Hi!

I would like to bring to notice a certain injustice that I have subjected to at the Bangalore Railway Station (Majestic). On September 30 (Friday), 2005, I had been to the station to see off my fiance and her mother. They took the Karnataka Express (Train #2627) to Jhansi at 6:30 pm.

On my way out I was asked to present my platform ticket by a railway official. On producing the same, the TT turned around and told me "What if I say that you haven't given me the ticket?" Before I could react, he along with his colleague pushed me into the adjacent enquiry cabin and physically manhandled me. I was slapped several times, my spectacles were grabbed and deliberately crushed by foot, and my phone was flung away from me. The RPF comprising of one RPF and four constables, appeared on the scene. The surrounding public was whisked away. None of the railway police officials cared to listen to me and they started hitting me indiscriminately with lathis. They dragged me out, and all the 4 constables continued hitting me with lathis from Platform 1 to Platform 3/5, till we reached the station master's cabin. Racist abuses and threats were made on the way. At the station master's cabin, I was told that I have been charged with a non-bailable offence and would be behind bars for 15 days.

Not for a single moment was I allowed to speak. All of a sudden a stranger came to the scene and he claimed that he was there to help me. Having lost all my physical strength and mental senses, I was happy to see some sort of help. He, claiming to be V Srinivas from Infosys, talked to the officials and the railway police in Kannada. He told me that the only way I was to get out was if I was willing to pay my way through. Being in no state to make a rational choice, I gave him my ATM card and pin. He took one of the RPF chaps along with him and said he would clear the matter. He returned some time later saying that everything was okay now.

I was asked to sign a statement which said that I hit the police and TT in a drunken state. I refused. Finally, they pressurized me to write that I did not produce a platform ticket when asked. I wrote the same and then V Srinivas took me out of the station. He joined me in an auto and took me to the ICICI ATM at Anand Rao circle. He withdrew Rs. 15000 from my ATM and got back. he took the cash under the pretext that while helping me he had left his wallet in the train he had left behind and that he would return the same through his ICICI Internet account. Having broken down mentally I did not realise that I was being cheated. He then took me to a Samsung showroom and tried purchasing a cellphone worth Rs. 18500 with my card. It was only then that I realised what was happening. I grabbed my card back, caught him by the collar, snatched my cash that lay in his pocket, and got into a running auto.

I have now realized that all of this was a plan. There is a strong nexus between the railway officials, the railway police and the fraudster. The railway officials identify a victim who they think is well-to-do, the RPF beat that individual till he has no physical or mental well-being. Then this fraud chap comes on to the scene, takes advantage of the situation, and takes all your cash away. Also, this series of events generally occurs on the last day of the month as they know that the salary gets credited on this day. (This strikes me now because the self-proclaimed Infy employee, V Srinivas, clearly asked me whether I had received my salary. He said that he just wanted to find out if there was cash enough to tackle the case.)

Now three days hence, I have tried to run from pillar to post. I have been forced to miss office hours in my effort to get justice. But I don't want to give up the fight midway. If any of you are in the media, or have friends/relatives who are in the industry, I'd like to speak with them about this in greater detail. I can be reached on 09886179319 or 08030933067. I believe it would catalyze my efforts.

Also, please pass this email to all the people who reside in Bangalore, so that they don't fall into the same trap.

Regards,
Nimish V Adani
IIML Batch of 2003
ITBHU Batch of 2001

Leap Of Faith

2005-09-29T17:46:00.000+05:30

Finding out whether a year is a leap year or not can be a bit tricky. Till quite recently I thought that any year evenly divisible by 4 was a leap year. Not quite so. There is more to it. As a first criteria the year should be divisible by 4. If its not divisible by 4, its not a leap year. If the year is also divisible by 100 (i.e. in addition to being divisible by 4) then you have something more to worry about; else you are done - its a leap year. The something more you have to worry about is that the year should also be divisible by 400, else its not a leap year.

The concept of leap year was introduced because the actual time taken by earth to go around the sun (called sidereal year) is not exactly 365 days but 365.25635 days. So once in every 4 years we add a day to that year (so that it will have 366 days) and we call it a leap year. But the fun doesnt end there. Adding 1 day every 4 years introduces some error which is taken care by stipulating that every year divisible by 100 is a leap year if and only if it is also divisible by 400.

Use this logic for determining whether a year is a leap year or not :
IsLeapYear = ((Year Mod 4 = 0) AND (Year Mod 100 <> 0) OR (Year Mod 400 = 0))

Happy Birthday to Me....

2005-06-27T12:28:00.000+05:30

I am 27 years old now :-)

Weasel Zone

2005-06-14T17:14:00.000+05:30

Today I made a long standing dream come true - I put my own forum online. The forum uses PHPBB and mySQL.
Weasel is a term that was popularized by Scott Adams through his Dilbert strips. The forum is intended for the weasels (including me) to know one another, share knowledge and help each other.
See my forum here.

Weaving a web

2005-06-07T12:19:00.000+05:30

Last week I bought a domain name and some webspace hosted by delta webhosting. They have some good deals and if Vikas Sasidharan is to be believed, they are pretty reliable too. I intend to build the site by using only a text editor, i.e. no WYSIWYG tools. I had used Dreamweaver in the past, and its a very good tool. But by relying on that, i didnt learn anything new. So I decided on learning HTML and probably PHP (since they support only PHP) to build my site. I think most of the content will be related to programming, but I may also move my blog there (or maybe just a mirror). I also plan to give some space for my friends so that they can host their resumes or write some articles or something like that.
Please visit http://www.pradeepc.net [if you have nothing else to do ;-)]

New Kids on the Blog

2005-06-07T10:14:00.000+05:30

Some of my friends have started blogging too :
Biju
Karuna
Sajeesh

Mere Naina Saawan bhaado...

2005-05-23T19:33:00.000+05:30

I saw the film "Naina" yesterday. I havent seen such a bad movie in recent times. I dont know what is the director's idea of a horror movie. He thinks showing a cesarean childbirth scares people. What it really did was make people throw up. Showing partially burned people and a human body in the middle of a medical operation etc are the "scariest" scenes in the film. I am surprised how the film got past the censor board.
Yuck !

1 year at Tavant

2005-05-20T18:55:00.000+05:30

Today I completed 1 year at Tavant.
Congrats to me ;-)

Let there be autocompletion...

2005-05-20T14:35:00.000+05:30

Auto completion for command prompt is a good feature to have. I found about it today, although I have seen it on Binil's machine quite some time ago. He told me it was done using editing the Windows registry and he didnt remember the exact steps. Windows registry not being the thing to play with, I left it at that. Today I was looking at the Global Assembly Cache using command prompt (Explorer doesnt give you the real view), I felt it would be nice to have this feature. I googled to find the answer nicely written down in simple steps. For the benefit of the fortunate few who reads my blog, I list the steps here ;-)

Log on as Administrator
Click Start, and then click Run
Type Regedit and OK
Double click HKEY_LOCAL_MACHINE
Double click SOFTWARE
Double click Microsoft
Double click Command Processor
In the right pane of Regedit, double click the 'CompletionChar' DWORD value
Type 9
Click OK
Close Regedit

There you are, all set to go...

Trick courtesy ActiveWin

Strange Beautiful Music

2005-05-18T15:33:00.000+05:30

Yesterday evening I went for the Joe Satriani concert with Tony, Rony and Jenson. Rony managed to get us some VIP passes so that we could see Joe from the very front. We reached the Palace Grounds by 5:45 pm and people were already standing in the queue for entering. We stood in the queue for half an hour before we found it was the wrong one :-)

VIP entrance was a different one and there was no queue there. Once we entered the stadium, we were really surprised to see that there were only few people. Tony was disappointed because Satriani is going to be disappointed when he sees the crowd :-D

A local band called Brahma played some songs before the actual concert started. They were not really bad, but recieved a lot of booes :-)) I felt that they were trying to be like Metallica a little too much, they could do much better if they try to have some identity of their own. As time passed by the crowd became strong and Tony was happy.

Satriani pulled a great show on the stage. He has this knack of making people go really wild and to get them very much involved into the show. I am making no comments of his amazing and unbelievable talent, the ads say it all - Joe Satriani, The God of Guitar. For the uninitiated it would be good to know that Joe Satriani has had 11 Grammy Nominations, 11 solo albums and millions of record sold world wide and has taught guitar to Kirk Hammet (Metallica) and Steve Vai.

All in all, the show the excellent and a memorable event for all of us. I am sure the guitar sales is going to be higher this week in Bangalore :-)

Still "On Top"

2005-05-13T11:11:00.000+05:30

Sony just found from MSDN that just adding a coma and one word could achieve what I wanted :-)

frmShowOnTop.Show ,frmMain

By the way, the method I posted yesterday was showing some strange behaviour. When I call SetParent API, the Coolbar (or Rebar) just disappeared underneath the menus. Couldnt find out what the problem was.

On Top of The World...

2005-05-12T10:21:00.000+05:30

I was facing an issue for quite some time with Visual Basic 6. I needed to make an MDI child window "On Top" of other MDI child windows. The obvious solution was to use the win32 API function SetWindowPos. I made a small function which will make a window "On Top" and back to "normal".

Public Sub MakeAlwaysOnTop(frm As Form, SetOnTop As Boolean)
Dim lflag as long
If SetOnTop Then
lflag = HWND_TOPMOST
Else
lflag = HWND_NOTOPMOST
End If
SetWindowPos frm.hwnd, lflag, 0,0, 0, 0, _
SWP_NOMOVE Or SWP_NOSIZE
End Sub

This works fine for normal windows but NOT for MDI child windows. If I minimize the MDI parent form, the "On Top" form will not get minimized but it will still stay "On Top" of any other application that might be running. Not a good solution. If I make the MDI Child property of the form to False, then it doesnt work at all (it simply doesnt stay on top).
I was surprised to find that almost all of the Google search results pointed to using the above method only. I am sure that many people would have faced the same problem. Then I remembered reading something on the web regarding setting the parent of a form at runtime.

So I tried this code in the Form_Load of my form after setting its MDI Child property to False.

Private Sub Form_Load()
SetParent Me.hwnd, fMainForm.hwnd
MakeAlwaysOnTop Me, True
End Sub

That did the trick :-)
Now the window stayed on top of other MDI child windows and automatically minimized when I minimized the MDI parent.
Big thanks to the person from whom i got the clue for using SetParent API function.

2005-05-05T23:19:00.001+05:30

Frankfurt Airport 3

2005-05-05T23:19:00.000+05:30

Frankfurt Airport 2

2005-05-05T23:18:00.000+05:30

Frankfurt Airport 1

2005-05-05T23:17:00.000+05:30

The World War II memorial

2005-05-05T23:16:00.000+05:30

Tired.

2005-05-05T23:15:00.000+05:30

In front of the American Archives building

2005-05-05T23:14:00.000+05:30

Washington DC

Rajesh, Yash, Manas, Austin and Me...

2005-05-05T23:13:00.000+05:30

Another snap at the MediaCybernetics Office

2005-05-05T23:12:00.000+05:30

Inside the Media Cybernetics lab

2005-05-05T23:11:00.000+05:30

At MediaCybernetics office, Silver Spring

2005-05-05T23:10:00.000+05:30

Rajesh and me at Frankfurt airport.

2005-05-05T23:09:00.000+05:30

@ Frankfurt

2005-05-05T23:08:00.000+05:30

The Symantec (Norton Antivirus) building at Washington DC

2005-05-05T23:06:00.000+05:30

Lunch @ Guappo's restaurent.

2005-05-05T23:04:00.000+05:30

The Amphitheatre at the Tomb of the Unknown Soldier.

2005-05-05T23:03:00.000+05:30

The Change of Guards @ The Tomb of the Unknown Soldier

2005-05-05T23:02:00.000+05:30

John F Kennedy rests here.

2005-05-05T23:01:00.000+05:30

The Arlington Cemetery.

2005-05-05T22:59:00.000+05:30

In Rajesh's room

2005-05-05T22:58:00.000+05:30

Four Points Sheraton, Bethesda - We stayed here.

2005-05-05T22:57:00.000+05:30

Welcome to Bethesda

2005-05-05T22:56:00.000+05:30

Wisconsin Avenue, Bethesda

2005-05-05T22:55:00.000+05:30

The escalator to the metro. Pretty scary :-)

2005-05-05T22:54:00.000+05:30

A distant view of the White house

2005-05-05T22:53:00.000+05:30

Inside the Lincoln memorial

2005-05-05T22:52:00.000+05:30

A view of the pool of reflection from the Lincoln memorial.

2005-05-05T22:50:00.001+05:30

The statue of Abraham Lincoln at his memorial place

2005-05-05T22:50:00.000+05:30

The Lincoln Memorial

2005-05-05T22:49:00.000+05:30

The pool of reflection

2005-05-05T22:48:00.000+05:30

On the way to the Lincoln memorial

2005-05-05T22:47:00.000+05:30

In front of the World War II memorial

2005-05-05T22:46:00.000+05:30

The World War II memorial.

2005-05-05T22:45:00.000+05:30

On the way to the World War II memorial

2005-05-05T22:44:00.001+05:30

In front of the Capitol building.

2005-05-05T22:44:00.000+05:30

The Iridium phone

2005-05-05T22:43:00.000+05:30

The propeller of the plane made by the Wright brothers.

2005-05-05T22:40:00.001+05:30

Another snap near the metro

2005-05-05T22:40:00.000+05:30

Near Federal Triangle Metro

2005-05-05T22:38:00.000+05:30

In front of the National Museum of American history

2005-05-05T22:37:00.000+05:30

In front of the White house

2005-05-05T22:36:00.000+05:30

The garden in front of the white house

2005-05-05T22:34:00.000+05:30

The White House

2005-05-05T21:54:00.000+05:30

Rajesh and a stuffed elephant :-)

2005-05-05T21:52:00.000+05:30

The 3 of us

2005-05-05T21:51:00.000+05:30

Manas and Rajesh in front of a museum

In the background is the Capitol building

2005-05-05T21:49:00.000+05:30

In the background is the Capitol hill

2005-05-05T21:48:00.000+05:30

@ the washington mall..

2005-05-05T21:47:00.000+05:30

Behind us is the Washington Memorial tower

2005-05-05T21:46:00.000+05:30

Manas, Rajesh and a friend we met @ Washington.

2005-05-05T21:45:00.000+05:30

Rajesh in his room.

2005-05-05T21:43:00.001+05:30

Thats me @ my hotel room.

2005-05-05T21:43:00.000+05:30

Thats my room @ Sheraton :-)

2005-05-05T21:42:00.000+05:30

Manas and me @ Frankfurt airport.

2005-05-05T21:41:00.000+05:30

Rajesh and Manas at Frankfurt airport.

2005-05-05T21:39:00.000+05:30

Me at hotel room.

A tooth for a tooth...

2005-03-11T16:22:00.000+05:30

I noticied last sunday that I had a small cavity in my tooth. So I went to see a dentist on tuesday. The dentist looked at the cavity and said, "Take an X-Ray, and do a scanning. After that we will decide what to do about it". I felt almost faint. Taking an X-Ray, and then a Scanning, for a tooth cavity ? Well, medical science has advanced a lot, so I guess we patients should pay the price for all those advancements :-p
For filling a cavity I spent INR. 1000 and 3 visits to the dentist. Now sweets doesnt taste that sweet anymore...

The Sultan of Swing

2005-03-08T14:37:00.000+05:30

Yesterday Binil and me went for the Mark Knopfler concert at Palace Grounds, Bangalore. The croud was not as big as the Bryan Adams concert, but still was big. We got there by 5:30 but they still had not opened the gates, so we went to a local bar (if u can call that a bar) to get our spirits high ;-) (coz if you wanna run cool, you gotta run on heavy heavy fuel...). The show started at 7:30 itself, which was kinda unexpected.
Knopfler was in splendid form. He weaved amazing riffs - the magical moments most notable in Sultans of Swing and Telegraph Road. U cant have anything but the utmost respect for this veteran rock star who came to "show off his the guitar" (Knopfler's own words). Knopfler is no longer the young rock star that he used to be, but he is still the sultan of swing :-)
Unfortunately I was having a sore throat and couldnt enjoy the show to the fullest :-( Hope to catch him live some other time...

Value Added Services

2005-03-08T14:29:00.000+05:30

Last week I received a SMS from Airtel : "We will be sending you messages when we introduce new VAS (Value Added Services). If you do not want to recieve these messages please send NO to 4321."
I sent NO to that number and got a response immediately : "Thanks for your consent to receive VAS (Value Added Services) notifications".
:-D

U2 snags 3 Grammys

2005-02-15T12:02:00.000+05:30

"Vertigo" swept all three categories in which it was nominated at tonight's Grammy Awards in Los Angeles:

Best Rock Performance By a Duo or Group With Vocal
Best Rock Song (songwriters award)
Best Short Form Music Video

U2 now has 17 career Grammy Awards. According to a Reuters article , U2, Alison Krauss and Ray Charles are now tied for 8th on the all-time list of Grammy winners.

Binil and Vineeth, see my post here, ;-)

The dark side of Visual Basic

2005-01-18T22:56:00.000+05:30

I have been looking into Object Orientated programming in Visual Basic 6 . Why look for something that isnt there, you might say. But you will be kinda surprised, as I was. There is support for Object Oriented programming in VB6 as opposed to popular belief. You can have encapsulation, polymorphism and inheritance (to some particular extend, as I will explain now).
To support encapsulation VB has a class module where you can group some data and methods which act on the data. Access control can be enforced using keywords Public, Private and Friend. Usage of this feature is highly recommended. While I am at it, I would like you to know that there is no support for static methods or data (methods and data belonging to the class as opposed to those belonging to an object of a class). That is restrictive to quite some extend, I agree.
Before speaking of inheritance we can group inheritance into 2 categories based on a single criteria - implementation inheritance and interface inheritance. In implementation inheritance, the derived class inherits all the implementation of the base class while in interface inheritance only the signature of the base class is recieved by the derived class. VB natively supports only interface inheritance. The keyword Implements is used to show that a class inherits the interface of another class. I have found that there is way to simulate implementation inheritance in VB by using composition. We can keep a private member object of the base class and delegate methods to that object if we dont want to implement any particular inherited method.
Support for polymorphism is rooted partly in this interface inheritance. That said, I would like to say there are 2 types of polymorphisms here. One happens when we have a base class and subclasses implementing the interface of the base class. We can refer to derived class objects using a reference variable of base class type and use it to achieve polymorphic calls to methods. The second way is when we keep object references as type Object (we can keep reference to objects of any class in a variable to type Object). Why I would like to differentiate between these two is because, in the first way, compiler can verify whether the object actually implements a particular interface thus preventing runtime error when method resolution fails. In the second way there is no way compiler can know if the object referred to by the Object variable actually has a particular method until runtime, when it is too late. I would suggest that whenever possible we should go for the first type of polymorphic calls.
The support for object orientation is not upto the mark (actually a bit too below the mark, I should say), but it is there all the same, as you can see. But VB.NET changes all these. Its a fully objected oriented language and very loveable ;-)
I had plans to include some code here, but I feeling sleepy and lazy :-)

Freedom of Speech ?

2005-01-13T14:28:00.000+05:30

If u haven't yet heard about an abusive call made by 2 prominent radio jockeys in US to call centre in India, read this. You can read the transcript here and download the mp3 file here.
I wonder whether this is the American way of exercising freedom of speech/expression ?

Friends are forever

2005-01-05T11:57:00.000+05:30

The friend access for a function is a constant source of debate among C++ programmers. Inside a class declaration, we can specify an external function as friend and this function has access to all member variables of that class. Quite extra-ordinary decision in the language design, dont u think so ? One can say that this breaks the encapsulation, which is one of the primary goals for an object oriented language. Private members of a class are supposed to be accessed only by members of that class. Naturally. So the concept of friend is not at all advisable or so it seems. Atleast I thought so. But Bjarne Stroustrup could see that in a language with pointers, manipulating the private members is always possible. So the access control in C++ is designed to protect programmers from unintentional errors while coding (comiler can let them know when they access something they shouldnt) and not for protecting private members from programmers who intentionally want to access them. friend access to a function is explicitly granted by the class author. A function cannot declare itself as friend of a class and go ahead and access private members of any class it likes. Hence the class author is aware of another function which can access its private members and hence everything here is intentional. Suppose if there was no friend access, then the class author should either make the members public or provide methods for reading and writing to the private members. Actually this corrupts the public interface of the class. The author usually wouldnt want to do this just because another function needs access to its private members. If he does this, now the private members are read/write enabled from anywhere. Having friends are not that bad after all ;-)
I would say that friend access should be used with discretion, if ever. But in some cases you can have a better design by using friend functions instead of avoiding them because OO purists think that it will break encapsulation, but choose them with diligence..

Welcome 2005 !

2005-01-03T10:50:00.000+05:30

On looking back, the year 2004 has brought so many changes to my life. For instance, I have started blogging ;-). Lol, on a serious note, the biggest event for me in 2004 was joining Tavant. That certainly changed my life for the better. For the first time in my life, I didnt feel bad staying away from home.
I spent new year eve with Sanjeev, Girish, Hari, Vineeth. We missed Binil. After lots of phone calls to wish our near and dear ones Happy New Year, we settled down for beer, wine and an old mallu movie "Boeing Boeing". On new year day, Deepa and Sindhu came over and we cooked food for lunch. Had a great time over the New Year weekend.
I wish that 2005 will bring peace,happiness and joy to all...

Christmas weekend

2004-12-28T17:28:00.000+05:30

The weekend was wonderful. Met old friends, had some beer with them, talked and laughed remembering the good old times...
I reached Bangalore today morning, and now feeling very sleepy :-)

Losing...

2004-12-13T11:44:00.000+05:30

I am still losing weight and is now 73.1 KG (measured sunday evening) despite the fact that I have added more carbohydrates to my diet....

Its working...

2004-12-10T14:11:00.000+05:30

I should say that the Atkin's diet is quite working for me.
Monday : 77.6 KG
Wednesday : 76.8 KG
Friday : 74.4 KG
And I took my first carbohydrate rich food today ;-)
Maybe this would nullify the effect of the diet... Well anyway now I know for sure that this diet works.